Electric Film Roller Greenhouse Roll Up Motor Venting Motor with Controller Box. If You Are Searching for a Greenhouse Roll-up Motor, This Kit Is Your Ideal Choice. Made of High-quality Iron, Aluminum Alloy, Copper, and #45 Steel, It Is Strong and Durable. The Pure Copper Motors with High Torque 100n. M and Suitable Speed (2.8rpm) Make It Convenient to Efficiently. Excellent Reliability Makes It an Ideal Choice for Shading Systems. With Two Pure Copper Motors and High Torque 100n. M, It Can Automatically Roll up to. Making It Suitable for Most Film Ventilation Coiling Work to Improve Efficiency and save Labor Costs. It Can Be Installed on the Side or Top of the Greenhouse for Uniform Ventilation. And Two Motors (24v 100w) Make It Suitable for Most Membrane Ventilation and Winding Operations for Rolling up the Side Curtain Film (the Side Wall Is Perpendicular to the Ground Without Curvature) or Bending the Side Curtain. The Iron and Aluminum Alloy Motor Shell Can Prevent Oxidation, Fall, Wear, Corrosion, Heat, Shock, and Deformation. The Internal Steel Gear with Heat Treatment Has High Hardness to. Fracture and Rust, and the Copper Wire Coil Has Good Conductivity to save Electricity. Meanwhile, the High Level of Protection (Ip 66) Makes It Suitable for Various Harsh Environments. You Can Use a Switch to Control the Motor on and off After Wiring. The Limit Switch Allows the Motor to Automatically Stop Working When It Reaches a Certain Height. You Can Adjust the Height of the Coil According to Actual Needs After the Motor Is Installed. And the Controller Is Mainly Used to Convert Voltage and Control Two Motors. This Kit Has Light Weight and Small Size, Making It Convenient for You to Carry It Anyplace. Simply Use Bolts to Tighten and Connect the Film Rolling Tube with the Product, and Then Secure the Film Onto the Tube with a Fixed Film Clamp. Another Option Is to First Fix the Film Onto the Rolling Rod and Then Attach the Motor. The Motor Is Equipped with Two Fuses for the Output of Two Channels and Has Reinforcing Ribs to Ensure Good Load-bearing Capacity. Meanwhile, the External Oil Seal Can Block the Entry of Water. This Product Comes in a Custom Foam That. Compression and Falls to Prevent Product Damage in Transit. We Aim to Provide Quality Products and Services. We Will Reply and Solve the Problem for You As Soon As Possible. The Motor Is Equipped with a. Cover, Making It Suitable for Use in Damp Environments. They Can Be Used to Fix the Rolling Rod for Better Stability. It Can Be Used for a Single Greenhouse, Connected Greenhouse, Solar Greenhouse, Fruit Greenhouse, Vegetable Greenhouse, Breeding Greenhouse, Flower Greenhouse, Connected Greenhouse, and Other Combined Greenhouses. Material: Iron, Aluminum Alloy, Copper, # 45 Steel. Number of Motors: 2. Rated Current: 3.6a. Motor Type: Pure Copper Motor. Maximum Roll bar Length. Maximum Rolling Height: 4m/13ft. Weight: 2.08kg/4.5lbs. Size: 2412cm/9.444.72inch. Wiring Input/Output: Dc 24v. Input Wire Voltage: Ac 110v. Plug Wire (Input) Length: 1.4m/4.75ft. Bare Wire (Output) Length: 0.4m/1.6ft. Joint Box: Transformer + Control. Weight: 0.8kg/1.7lbs. Size: 20138cm/7.875.113.14inch. Before Turning on the Controller, Please Check and Make Sure the Output Cable Isn’t Short-circuited. Please Install It in the Greenhouse. This Product Does Not Come with a Timer. Dc 24v Motors Must Be Used Together with Transformers. It Cannot Be Directly Connected to Strong Voltages of 110v or 220v. When Selecting a Transformer, the Capacity of the Transformer Should Be Considered, and in Principle, the Capacity of the Transformer Should Be Greater than the Total Power at the Load End. After Installing the Motor, Ensure That the Film Rolling Rod Is at Right Angles to the Pivot Support Rod. If the Wire Is Within 165 Feet, It Is Recommended to Use a 16 Awg Wire (Not Included) for the Motor. If 20 Motors Are Connected at the Same Time, It Is Recommended to Use a 1600w or 2000w Transformer (Not Included). A Motor Is Used for Ventilation on One Side and Requires a Controller with a Switch to Turn the Motor on/off and Adjust the Rolling Direction. After the Installation of the Motor, Be Sure to Close the. Cover to Prevent Water Accumulation and Dust. Please Allow the Slight Color Difference Caused by the Shooting Light and 1-3cm Error Due to Manual Measurement, and Make Sure You Do Not Mind Before Ordering. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Garden Structures & Shade\Greenhouses & Cold Frames”. The seller is “ebestbayion” and is located in this country: US. This item can be shipped to United States.
- Item location: CA /NJ /Austell
- Type: Electric Greenhouse Motor
- Rated Current: 3.6A
- Torque: 100N.m
- Size: 24*12cm/9.44*4.72inch
- Power: 100W
- Brand: Unbranded
- Shipping notice: Can not ship to Puerto Rico,Alaska/Hawaii
- Voltage: 24V
- Speed: 2.8RPM
- Travel Limit: 40 loops
- Maximum roll bar length: 360ft (110m)